FlatworkCopperline Distribution Center
Buckeye, AZ
Slab412,000 SF
Mix4,500 PSI, Type II/V
MeasuredFF 68 / FL 46
Pours14 nights, laser screed
Concrete only. Phoenix proven.
Flat Floors and Foundations That Break Above the Number
Corework is a concrete-specialty contractor for the Valley: foundations, laser-screeded flatwork, polished floors, and decorative concrete, placed on hot-weather schedules and verified with published cylinder breaks and FF/FL numbers.
AZ ROC License No. 555-0770, CR-9 Concrete (fictional) · Fictional demo site
0+
Years pouring the Valley
0M SF
Slab placed and finished
0+
Pours last season
0%
Breaks at or above design
Figures illustrative. Fictional demo company.
18+Years on Valley ground
Why Corework
The Concrete Sub That GCs Schedule Around
We do one material. Because of that, our crews, our equipment, and our paperwork all point at the same three questions: is it flat, did it break above design, and did it cure right.
- Pour cards published before every placement
- Third-party FF/FL and cylinder verification
- ACI 305 hot-weather plans in writing
- Self-perform crews, no broker labor
What we pour
Four Scopes. One Material.
No framing division, no paint crew, no distractions. Every Corework crew works concrete, and only concrete, from the first footing to the final gloss reading.
Foundations
Footings, stem walls, grade beams, and post-tension slabs that pass inspection the first time.
See the specStructural Flatwork
Laser-screeded slabs measured for FF/FL by a third party, with the numbers published.
See the specPolished Floors
Ground, densified, and polished floors specified by gloss level and aggregate exposure.
See the specDecorative Concrete
Stamped, colored, sandblasted, and board-formed concrete that survives Phoenix sun.
See the specFeatured pours
Slabs We Would Sign Twice
Flatwork
PolishedSaguaro Gateway Logistics
Glendale, AZ
Polish96,000 SF, class B
Grit800, satin
Gloss54 avg at 60 deg
JointsEpoxy-filled, flush
FoundationsCamelback Medical Pavilion
Phoenix, AZ
Footings1,900 CY placed
MixType V, w/c 0.44
Breaks5,610 PSI avg at 28d
EmbedsZero relocated
Figures illustrative. Fictional demo company. Spec plates show representative values.
The pour sheet
Specs We Hold, In Writing
Every placement runs against a published pour card. These are the working ranges. All values illustrative for this fictional demo.
Mix + strength
- Design range2,500-8,000 PSI
- Sulfate soilsType V, w/c 0.45 max
- Water reducerMid-range standard
- Long haulsHydration stabilizer
- FibersMacro-synthetic on spec
Flatness + joints
- Standard slabsFF 50 / FL 35
- Superflat aislesFF 100+
- ProfilingASTM E1155, 3rd party
- Saw cutsEarly entry, 1-2 hr
- Spacing24-30 x thickness
Hot weather + cure
- DoctrineACI 305
- Max placement temp95 F
- Summer batch4:30 a.m. first truck
- Chilled loadsIce / chilled water
- Cure7-day wet or C1315
Word on the jobsite
What GCs and Owners Say Back
Fictional voices for a fictional firm, written the way our real clients would have to talk about us.
“Their pour card told us the flatness target, the cure method, and the batch time before we asked. The profile report beat spec, and it was in our inbox two days after the pour.”
“We stopped bidding concrete to three subs. Corework's number is rarely the lowest, but it is the only one that still looks right in month nine.”
“July pour, 108 degrees. They batched at 4 a.m., iced the loads, and the breaks came back 22 percent over design. The patio still matches the sample slab they kept on site.”
Let's pour
Got a Slab Going to Bid?
Send the structural set, the geotech report, or just the square footage and the date you need to load the dock. The bid desk reads plans same-week and answers with numbers, not adjectives.
- (555) 040-7700
- bids@coreworkconcrete.com
- 2140 E Quarry Yard Road, Phoenix, Arizona 85040
Request a bid
Plans, a napkin sketch, or just a square footage. No commitment. (Demo form; submission is simulated.)
Open the bid request formBid desk answers Monday to Friday, 5:00 to 15:00. Fictional demo.